Vaea's New Rudders finally lashed on!

Home Forum Design Specific Boards Tiki and Coastal Trek Designs Vaea's New Rudders finally lashed on!

These forums are now closed

The forums are closed to new contributions. For informational purposes, all posts will remain available to read here.

5 posts / 0 new
Last post
Anonymous (not verified)
Vaea's New Rudders finally lashed on!
Little by little, step by step, if you get my drift. . . ;) [img]http://farm3.static.flickr.com/2480/3590365627_038e668cc0.jpg[/img] Those with sharp eyes will notice I missed a hole at the top lashing: saw it after I took the photo and fixed it! :oops:
Anonymous (not verified)
Re: Vaea's New Rudders finally lashed on!
Hi Kim, Looking very good. If we didn't make mistakes we would never make anything ? We broke the tiller bar going out to the mooring first time out. A new one is being painted at the moment. I also need to work up a tramplone A.S.A.P., falling through a faded one was not in the plan. It's all part of the fun. I hope you are back in the water soon, Regards, Jackie.
Anonymous (not verified)
Re: Vaea's New Rudders finally lashed on!
Thanks, Jackie. Here is a shop that specializes in multihull netting and knotless tramps: [url]http://www.multihullnets.com/[/url] Otherwise known as Sunrise Yacht Products. Vaea's front tramp came from them. It's 1" wide webbing, with 1 1/2 or 2" openings. Very comfortable to walk or lay on.
Anonymous (not verified)
Re: Vaea's New Rudders finally lashed on!
Looks good Kim i like the Wharram logo.
Anonymous (not verified)
Re: Vaea's New Rudders finally lashed on!
tatoski, I raised the rudders by 3/8"above the skeg, and then transferred the top of the rudder marks to the sterns. I then made a mark 1/8" above those marks to use as the top of the stern marks. Clear as mud? :lol: