COVID-19: Still dispatching orders as usual

Black spots under epoxy

Home Forum Design Specific Boards Tiki and Coastal Trek Designs Black spots under epoxy
2 posts / 0 new
Last post
Anonymous (not verified)
Black spots under epoxy



I've glassed my Tiki21 several years ago, when for various reasons I stopped working on him. It was on dry and dark place to protect the epoxy coating from UV.


Now I've wanted to continue working on it and after cleaning I saw some black spots UNDER the epoxy glass coat. It is on outer hull skin. Couple of them, on area not bigger then fist.

Fotos here:


The boat was never wet, plywood was dry, it was built under the roof, so I can't imagine what would cause these black spots (they seem to be in rowing squares).


Any ideas? Should I go ahaed and not worry? Or sand all the epoxy over black spots and patch thing up? 


Next stage is sanding before adding filler coat.


Thanks very much for help

Edit on 5.12.2012.

I've sanded a small area to see what happens - dots are not on plywood, just in rowing. Spots dissapear befor I reach the plywood material. I've added some more photos to see.

Advice on proceeding activities welcome.



Last seen: 1 month 3 weeks ago
Joined: 05/30/2014 - 07:41
Anyone have any answers

I was just reading through some posts and I would like to know the answer to this question too. Any experts out there?