anchor hardware

2 posts / 0 new
Last post
Anonymous (not verified)
anchor hardware
Hey people, I've to install anchoring hardware on my tiki 21 (in recostruction). I'm thinking to put it on the rear crossbeam, in order to let me anchoring usually from the stern. I think it would be better if I sail singlehanded, so I can anchor or moor while working on the engine and steering. Please let me know you experience. Pictures are welcome ;-)) Tommaso - A tiki in Italy
Anonymous (not verified)
Re: anchor hardware
I've heard of several people dropping anchor from the stern while single-handing, Tommaso. Most of them would then walk the rode to the bow after setting the anchor, in order to sail off the anchor upon leaving. So your setup would have to keep that in mind.