Measurements for bulkhead

Home Forum Design Specific Boards Tiki and Coastal Trek Designs Measurements for bulkhead

These forums are now closed

The forums are closed to new contributions. For informational purposes, all posts will remain available to read here.

1 post / 0 new
puravida3
Offline
Last seen: 9 years 4 months ago
Joined: 22/11/2014 - 15:11
Measurements for bulkhead

            I am just starting my build on a Tiki 26.  I have cut out the stems, stern and the rudders. Have started on the bulkheads but have a problem with bulkhead #2. The plans are folded right over the measurements for the length from the keel to the cabinside. All I can see on the plans 90 __mm or  ___ /16 inches.  Any help with this problem will be greatly appreciated. Thanks from Florida