Tiki 26: wetted surface

3 posts / 0 new
Last post
Anonymous (not verified)
Tiki 26: wetted surface
Hi there, does someone know about how much is the wetted surface of a tiki 26? Cheers, Uli T26 Hokuspokus
Anonymous (not verified)
Re: Tiki 26: wetted surface
How accurate do you need it? My rough guess would be that a side of a hull was probably 8m x 0.4m (length x depth) = 3.2 sqm and you have 4 sides 3.2 x 4 = 12.8sqm I presume this is for antifouling. If so, I'd be surprised if you didn't get 2 coats out of a standard 2.5L tin.
Anonymous (not verified)
Re: Tiki 26: wetted surface
Hi all,just antifouled my Tiki 26 and was surprised to complete the job useing 1 litre.Because the weather was cold the paint was slightly thinned.I,m sure 2.5 litres would give two good coats. Phil (tiki 26 "SCOOBY")