Little by little, step by step, if you get my drift. . . ;)
[img]http://farm3.static.flickr.com/2480/3590365627_038e668cc0.jpg[/img]
Those with sharp eyes will notice I missed a hole at the top lashing: saw it after I took the photo and fixed it! :oops:
These forums are now closed
The forums are closed to new contributions. For informational purposes, all posts will remain available to read here.
Wed, 03/06/2009 - 03:08
#1
Vaea's New Rudders finally lashed on!
Wed, 03/06/2009 - 11:32
#2
Re: Vaea's New Rudders finally lashed on!
Hi Kim, Looking very good. If we didn't make mistakes we would never make anything ?
We broke the tiller bar going out to the mooring first time out. A new one is being
painted at the moment. I also need to work up a tramplone A.S.A.P., falling through
a faded one was not in the plan. It's all part of the fun. I hope you are back in the water
soon, Regards, Jackie.
Wed, 03/06/2009 - 14:35
#3
Re: Vaea's New Rudders finally lashed on!
Thanks, Jackie. Here is a shop that specializes in multihull netting and knotless tramps: [url]http://www.multihullnets.com/[/url] Otherwise known as Sunrise Yacht Products. Vaea's front tramp came from them. It's 1" wide webbing, with 1 1/2 or 2" openings. Very comfortable to walk or lay on.
Thu, 04/06/2009 - 00:15
#4
Re: Vaea's New Rudders finally lashed on!
Looks good Kim i like the Wharram logo.
Wed, 10/06/2009 - 02:20
#5
Re: Vaea's New Rudders finally lashed on!
tatoski,
I raised the rudders by 3/8"above the skeg, and then transferred the top of the rudder marks to the sterns. I then made a mark 1/8" above those marks to use as the top of the stern marks. Clear as mud? :lol: